H PE heat shrinkable tube
Product Description
Description
H PE Heat shrinkable tubes are made by using superior high polymer to automatically mix into high polymer alloy
with scientific formula. When the products are molded, they will be irradiated to be crosslinking by electron accelerator
and then continuously expanded untill they are done.
H PE Heat shrinkable tubes are made by using superior high polymer to automatically mix into high polymer alloy
with scientific formula. When the products are molded, they will be irradiated to be crosslinking by electron accelerator
and then continuously expanded untill they are done.
Working temperature:-55℃~125℃
Rated voltage: 600V
Advantages: environmentally friendly, soft, flame retarding, fast shrinkage, insulation, oil and acid resisitance,
stable properties.
stable properties.
Application: The product is widely used in connecting wire, protecting welding spot, the terminal of wire, wiring
harness and electron component. On the other hand, it is also good at protecting and insulating treating of electron
component, wiring harness processing, household appliances, motor and inner connecting line of eqquipment and
instrument etc.
Technical Data Sheet
Standard color: Black, White, Red, Yellow, Green, Blue, Purple, Grey, Brown, Iron Oxide Red(other colors could be customized) | |||||||||||
Standard color | Black | White | Red | Yellow | Green | Blue | Purple | Grey | Brown | Iron Oxide Red | |
color identification | 186U | 114U | 3288U | 646U | 2735U | 427U | 483U | 484U | |||
color code |
Properties | |||||||||
Properties | Condition | Value | |||||||
Physi cal | Tensile Strength | GB/T1040 | ≥10.4Mpa | ||||||
Elongation | GB/T1040 | ≥200% | |||||||
Tensile strength after aging | 158±1°C,168hr | ≥70% | |||||||
Elongation after aging | 158±1°C,168hr | ≥100% | |||||||
Heat shock | 250°C 1hr | no cracking | |||||||
Cold bend | —30°C,1hr | no cracking | |||||||
Electrical | Dielectric Voltage withstan | 60sec | ≥2500V | ||||||
Volume resistivity | GB/T1410 | ≥10^14Ω.CM | |||||||
Chemical | Corrosion | 158±1°C,168hr | PASS | ||||||
Copper stability | 158±1°C,168hr | elongation ≥100% | |||||||
Flammability | VW-1 | PASS | |||||||
Temperature rating | 125°C |
Specifications | ||||||||||||||||
SPEC | As supplied | After shrinking | Standard Packing | Scope of Application(mm) | ||||||||||||
Inside diameter | Wall Thickness | Inside diameter | Wall Thickness | m/roll | roll/ctn | specification(cm) | ||||||||||
Φ0.6 | 0.9±0.2 | 0.10±0.05 | ≤0.40 | 0.22±0.10 | 200 | 23 | 31×31×44.5 | 0.4~0.7 | ||||||||
Φ0.8 | 1.0±0.2 | 0.15±0.05 | ≤0.50 | 0.22±0.10 | 200 | 23 | 31×31×44.5 | 0.6~0.8 | ||||||||
Φ1.0 | 1.5±0.3 | 0.15±0.05 | ≤0.65 | 0.28±0.10 | 200 | 16 | 31×31×44.5 | 0.75~0.9 | ||||||||
Φ1.5 | 2.0±0.3 | 0.18±0.05 | ≤0.85 | 0.32±0.10 | 200 | 12 | 31×31×44.5 | 0.95~1.4 | ||||||||
Φ2.0 | 2.5±0.3 | 0.18±0.05 | ≤1.00 | 0.35±0.10 | 200 | 15 | 46×46×44.5 | 1.1~1.8 | ||||||||
Φ2.5 | 3.0±0.3 | 0.18±0.05 | ≤1.30 | 0.38±0.10 | 200 | 13 | 46×46×44.5 | 1.35~2.3 | ||||||||
Φ3.0 | 3.5±0.4 | 0.18±0.05 | ≤1.50 | 0.40±0.10 | 200 | 11 | 46×46×44.5 | 1.6~2.7 | ||||||||
Φ3.5 | 4.0±0.4 | 0.22±0.05 | ≤1.80 | 0.42±0.10 | 200 | 9 | 46×46×44.5 | 1.85~3.2 | ||||||||
Φ4.0 | 4.5±0.4 | 0.25±0.05 | ≤2.00 | 0.45±0.10 | 200 | 7 | 46×46×44.5 | 2.1~3.6 | ||||||||
Φ4.5 | 5.0±0.4 | 0.25±0.05 | ≤2.30 | 0.50±0.10 | 100 | 10 | 46×46×44.5 | 2.35~4.0 | ||||||||
Φ5.0 | 5.5±0.4 | 0.25±0.05 | ≤2.5 | 0.55±0.10 | 100 | 9 | 46×46×44.5 | 2.6~4.5 | ||||||||
Φ6.0 | 6.5±0.4 | 0.28±0.05 | ≤3.0 | 0.55±0.10 | 100 | 7 | 46×46×44.5 | 3.1~5.4 | ||||||||
Φ7.0 | 7.5±0.4 | 0.28±0.05 | ≤3.5 | 0.55±0.10 | 100 | 14 | 46×46×31 | 3.7~6.3 | ||||||||
Φ8.0 | 8.5±0.5 | 0.28±0.05 | ≤4.0 | 0.60±0.10 | 100 | 13 | 46×46×31 | 4.2~7.2 | ||||||||
Φ9.0 | 9.5±0.5 | 0.30±0.08 | ≤4.5 | 0.60±0.10 | 100 | 12 | 46×46×31 | 4.7~8.0 | ||||||||
Φ10 | 10.5±0.5 | 0.30±0.08 | ≤5.0 | 0.60±0.10 | 100 | 11 | 46×46×31 | 5.2~9.0 | ||||||||
Φ11 | 11.5±0.5 | 0.30±0.08 | ≤5.5 | 0.60±0.10 | 100 | 11 | 46×46×31 | 5.7~10 | ||||||||
Φ12 | 12.5±0.5 | 0.30±0.08 | ≤6.0 | 0.60±0.10 | 100 | 10 | 46×46×31 | 6.2~11 | ||||||||
Φ13 | 13.5±0.5 | 0.35±0.10 | ≤6.5 | 0.65±0.10 | 100 | 9 | 46×46×29.5 | 6.7~12 | ||||||||
Φ14 | 14.5±0.5 | 0.35±0.10 | ≤7.0 | 0.65±0.10 | 100 | 9 | 46×46×31 | 7.3~13 | ||||||||
Φ15 | 15.5±0.6 | 0.40±0.12 | ≤7.5 | 0.70±0.10 | 100 | 8 | 46×46×29.5 | 7.8~14 | ||||||||
Φ16 | 17.0±0.6 | 0.40±0.12 | ≤8.0 | 0.70±0.10 | 100 | 8 | 46×46×31 | 8.3~15 | ||||||||
Φ17 | 17.5±0.6 | 0.40±0.12 | ≤8.5 | 0.70±0.10 | 100 | 7 | 46×46×29.5 | 8.8~16 | ||||||||
Φ18 | 19.0±0.7 | 0.40±0.15 | ≤9.0 | 0.80±0.15 | 100 | 7 | 46×46×29.5 | 9.3~17 | ||||||||
Φ20 | 22.0±0.7 | 0.40±0.15 | ≤10.0 | 0.80±0.15 | 100 | 6 | 46×46×29.5 | 10.4~19 | ||||||||
Φ22 | 24.0±0.7 | 0.40±0.15 | ≤11.0 | 0.80±0.15 | 100 | 6 | 46×46×31 | 11.4~21 | ||||||||
Φ25 | 26.0±0.7 | 0.55±0.15 | ≤12.5 | 0.90±0.15 | 50 | 6 | 46×46×31 | 12.8~24 | ||||||||
Φ28 | 29.0±0.7 | 0.55±0.15 | ≤14.0 | 0.90±0.15 | 50 | 5 | 46×46×29.5 | 14.4~29 | ||||||||
Φ30 | 31.5±0.7 | 0.55±0.15 | ≤15.0 | 0.95±0.15 | 50 | 5 | 46×46×31 | 16~29 | ||||||||
Φ35 | 36.5±0.7 | 0.55±0.15 | ≤17.5 | 1.00±0.15 | 50 | 4 | 46×46×29.5 | 18~34 | ||||||||
Φ40 | 41.5±0.7 | 0.55±0.15 | ≤20.0 | 1.00±0.15 | 50 | 4 | 46×46×31 | 21~39 | ||||||||
Φ45 | 46.0±0.7 | 0.55±0.15 | ≤22.5 | 1.00±0.15 | 25 | 5 | 31×31×40.5 | 23~44 | ||||||||
Φ50 | 51.0±0.7 | 0.55±0.15 | ≤25.0 | 1.00±0.15 | 25 | 5 | 46×46×44.5 | 26~49 | ||||||||
Φ60 | ≥60 | 0.60±0.15 | ≤31.0 | 1.30±0.20 | 25 | 4 | 31×31×42 | 35~55 | ||||||||
Φ70 | ≥70 | 0.65±0.15 | ≤36.0 | 1.30±0.20 | 25 | 3 | 31×31×37 | 40~65 | ||||||||
Φ80 | ≥80 | 0.70±0.15 | ≤41.0 | 1.46±0.20 | 25 | 3 | 31×31×42 | 45~75 | ||||||||
Φ90 | ≥90 | 0.70±0.15 | ≤46.0 | 1.46±0.20 | 25 | 2 | 31×31×32 | 50~88 | ||||||||
Φ100 | ≥100 | 0.70±0.20 | ≤51.0 | 1.46±0.20 | 25 | 2 | 31×31×34.5 | 55~95 | ||||||||
Φ120 | ≥120 | 0.70±0.20 | ≤61.0 | 1.56±0.20 | 15 | 2 | 31×31×40.5 | 65~115 | ||||||||
Φ150 | ≥150 | 0.70±0.20 | ≤76.0 | 1.56±0.20 | 15 | 2 | 31×31×49.5 | 80~145 | ||||||||
Φ180 | ≥180 | 0.70±0.30 | ≤91.0 | 1.56±0.20 | 15 | 1 | 31×31×31 | 95~175 |