Silicone rubber heat-shrinkable tubes
Product Description
Description:
Silicone rubber heat-shrinkable tube is designed for the insulation and protection of electronic component.
Working temperature: -50℃~200℃
Application: the product is widely used in the insulation and protection of household appliance, energy-saving
lights, medical apparatus and instruments, aerospace, transformer and motor and so on.
Technical Data Sheet
Properties | ||||||
Color | Grey, rust red | outlook | Shining surface and clean inwall | |||
Working temperature | 50200 | Shrinkage temperature | ≥90% | |||
Permittivity(★)50HZ | 3.2 | Axial shrinkage(Dia.)(%) | About50 | |||
Hardness | 75±10 | Tensibility(%) | 400 | |||
Corrosion | No corrosion | FlammabilityUL-224 | VW-1 | |||
Antibiotic and erosion resistance | Good | Resistance | wear resistance, acid-base resistance、waterproof, mildew proof, corona electrode, industrial solvent resistance, Resistance to external mechanical damage, oil and special liquid resistance | |||
Toughness | Good | |||||
Tensile strength Mpa(kgf/cm) | 6.9(70) | |||||
Breakdown voltage (normal temperature)(kv/mm) | 25 | environmental protection | no harm to human and environmrnt |
Specifications | ||||||||
Specifi cations | Sides before shrink | Sides after shrink | ||||||
Inside diameter | Wall thickness | Inside diameter | Wall thickness | |||||
1.5 | 1.7±0.2 | 0.5±0.1 | 0.8±0.1 | 1.0±0.2 | ||||
2.0 | 2.3±0.2 | 0.5±0.1 | 1.2±0.1 | 1.0±0.2 | ||||
3.0 | 3.2±0.2 | 0.5±0.1 | 1.8±0.1 | 1.0±0.2 | ||||
4.0 | 4.5±0.3 | 0.5±0.1 | 2.2±0.1 | 1.0±0.2 | ||||
5.0 | 5.6±0.3 | 0.5±0.1 | 2.9±0.1 | 1.0±0.2 | ||||
6.0 | 6.6±0.3 | 0.5±0.1 | 3.3±0.1 | 1.0±0.2 | ||||
7.0 | 7.6±0.4 | 0.5±0.1 | 3.8±0.1 | 1.0±0.2 | ||||
8.0 | 8.6±0.4 | 0.5±0.1 | 4.3±0.1 | 1.0±0.2 | ||||
9.0 | 9.0±1.0 | 0.5±0.1 | 4.8±0.1 | 1.0±0.2 | ||||
10.0 | 10.0±1.0 | 0.5±0.1 | 5.2±0.1 | 1.0±0.2 | ||||
12.0 | 12.0±1.0 | 0.7±0.1 | 6.2±0.1 | 1.5±0.2 | ||||
14.0 | 14.0±1.0 | 0.7±0.1 | 7.5±0.1 | 1.5±0.2 | ||||
15.0 | 15.0±1.0 | 0.7±0.1 | 8.2±0.1 | 1.5±0.2 | ||||
17.0 | 17.0±1.0 | 0.7±0.1 | 8.5±0.1 | 1.5±0.2 | ||||
20.0 | 20.0±1.0 | 1.0±0.1 | 12.0±0.1 | 2.0±0.3 |